 |
|
|
| |
|
|
|
|
|
|
- (23)
- (1)
- (1)
- (1)
- (1)
- (2)
- (1)
- (1)
- (2)
|
|
| |
|
|
Build Your Online Product Catalogs?
Sieve Bend Screen / Side Hill Screen
The dewatering capacity of a wedge wire cross flow sieve bend screen is primarily influenced
by the screen width, the slot opening, and the wire size (width). The chart below shows typical
dewatering capacities in US gallons per minute (GPM) per foot of screen width. Actual capacity
varies depending on the feed content and desired efficiency.
Screening efficiency and solids capacity are directly related to the length (arc length). Longer
arc lengths should be considered for feed containing a high percentage of solids.
Screen curvature and arc length are expressed as a segment of a circle.
The dewatering capacity of cross flow dewatering screens such as the sieve bend
can be greatly increased by tilting the wedge wires. The wedge wires are tilted 2 to 7
degrees depending on the wire size and slot opening.
The effective range of slot openings for a gravity-fed cross flow sieve bend screen is
generally considered to be .015" to 1/8". The installation angle of a sieve bend screen is
usually 50 to 60 degrees from the horizon. The point of size separation for this installation
angle is approximately 50% of the slot opening size. |
| Company: |
Shenze County Kaiyuan Metal Products co.,ltd
|
| Contact: |
Ms. Wendy Xu |
| Address: |
Dazhen Village |
| Postcode: |
052560 |
| Tel: |
15076169400 |
| Fax: |
0311-83548125 |
| E-mail: |
|
|
|
Home
